the water balloon burst due to the excessive amount of force being applied to it by the bike. since the force pushing against the balloon was greater than than its own force and the water had no were to go the balloon burst as you can see here also cool picture colin
The water balloon pops when you ride a bike over it because all the force and mas pushing downwards on the balloon pushed all the water to the sides of the balloon where it cant handle the pressure making the balloon burst QF
This is physics because when the bicycle rides over the water balloon it causes the balloon to explode. It causes the ballon to explode because the bicycle's force outweighs the water balloons force tremendously. Therefore, the water balloon cannot handle the bicycles force causing it to explode.
The water balloon popped due to the mass of the wheel being exponentially larger than the outer shell of the balloon. This happens due to gravity, which forces the bike, as well as the balloon, to the ground.
The balloon sat against the hard pavement, already being forced onto the ground by the Earth's gravitational pull. As Travis' bike rode over the balloon, it forced the mass of water in the center towards the opposite poles of the object (much like the watermelon). As a result, the surface area of the balloon could not contain the mass of the water being forced inside it, and the elasticity was not great enough to prevent the balloon from shattering. As Travis rode his bike over the balloon, it popped in a watery burst. -Charlie
This picture is cool because the water is still in the shape of the balloon before it popped. Since the bike pushed down on the balloon it pushed water out to the sides and became too pressurized for the balloon to handle. Then the balloon popped in a shower of water!
This balloon popped because of the wheels mass being exerted on the balloon. the reason why this happened was because the balloon was being forced into the ground and had know where to go but to go go outwards and explode.
Due to the massive weight of the bike rolling over the water balloon, it caused it to pop. Because of the position of the balloon at the time; when the balloon tried to return to its original shape, the water was left to free fall. The water that you see here is probably falling, though it does look very cool.
the water balloon burst due to the excessive amount of force being applied to it by the bike. since the force pushing against the balloon was greater than than its own force and the water had no were to go the balloon burst as you can see here
ReplyDeletealso cool picture
colin
The water balloon pops when you ride a bike over it because all the force and mas pushing downwards on the balloon pushed all the water to the sides of the balloon where it cant handle the pressure making the balloon burst
ReplyDeleteQF
This is physics because when the bicycle rides over the water balloon it causes the balloon to explode. It causes the ballon to explode because the bicycle's force outweighs the water balloons force tremendously. Therefore, the water balloon cannot handle the bicycles force causing it to explode.
ReplyDeletePC
The water balloon popped due to the mass of the wheel being exponentially larger than the outer shell of the balloon. This happens due to gravity, which forces the bike, as well as the balloon, to the ground.
ReplyDeleteThe balloon sat against the hard pavement, already being forced onto the ground by the Earth's gravitational pull. As Travis' bike rode over the balloon, it forced the mass of water in the center towards the opposite poles of the object (much like the watermelon). As a result, the surface area of the balloon could not contain the mass of the water being forced inside it, and the elasticity was not great enough to prevent the balloon from shattering. As Travis rode his bike over the balloon, it popped in a watery burst.
ReplyDelete-Charlie
This picture is cool because the water is still in the shape of the balloon before it popped. Since the bike pushed down on the balloon it pushed water out to the sides and became too pressurized for the balloon to handle. Then the balloon popped in a shower of water!
ReplyDeleteThis balloon popped because of the wheels mass being exerted on the balloon. the reason why this happened was because the balloon was being forced into the ground and had know where to go but to go go outwards and explode.
ReplyDeleteDue to the massive weight of the bike rolling over the water balloon, it caused it to pop. Because of the position of the balloon at the time; when the balloon tried to return to its original shape, the water was left to free fall. The water that you see here is probably falling, though it does look very cool.
ReplyDelete